WERA Bit for inner hex screws 1/4" DIN 3126 C 6.3 type 6429
Product documents
Document | Document type |
---|---|
Product overview |
Bit for hexagon screws 1/4" DIN 3126 C 6.3, tough version, WERA
Application note:
Extra hard for soft driving into wood; to prevent premature breakage.
Tough ? for hard driving in metal and sheet metal; to prevent premature breakage.
Torsion ? Through Torsionstechnik, torque peaks in the torsion area of the bit are cushioned when screwing, premature wear is avoided and tool life is increased.
BiTorsion ? The torsion area of the BiTorsion bit has to be reduced by about 20 % hardness compared to the shaft. It absorbs higher torque peaks. This extends the life of the bit significantly.
Diamond-coated ? Universally applicable, long life. Tiny diamond particles bite formally into the screw and ensure a secure grip of the tool in the screw head.
Impactor ? especially durable bit series, also for use with impact screwdrivers. Above-average service life due to optimum exploitation of material properties matched specifically to the extreme requirements of geometries and their manufacturing process. In producing the Wera Impaktor bit series, the optimum combination of geometric design, hardness, manufacturing processes and compensation for each drive profile and thus for individual screwing has been achieved.
Technology matched to output and application leads to optimum lifetimes per profile. Through the TriTorsion system, Impactor screws respond individually to the drives used. The different sized torsion areas automatically respond to the applied torque peaks and adjust optimally to the screwing.
In addition, these bits have a coating of tiny diamond particles, which formally bite into the screw head and ensure a secure grip of the tool in the screw head.
Stainless ? Stainless steel bits are used everywhere where rust must be avoided on stainless steel. Especially for turning stainless steel screws in window and door construction, faucets and sinks, walls, railings, balconies, fences, etc. With its vacuum ice-hardening, a production suitable hardness is achieved.
With Hex-Plus geometry, therefore 20 % more static torque and protection of the hexagon screw. Especially suitable for turning screws in metal and sheet metal.
WERA
Bit tough 1/4" DIN3126C6.3 recessed hexagon 2x25mm
ERIKS Item #: W90A-64290005
Catalogue item no 1: 3144124 Catalogue item no 2: W80E-50448 Estimated delivery date 14-05-2024
|
Price (Per piece):
£1.88
|
||
WERA
Bit tough 1/4" DIN3126C6.3 recessed hexagon 2.5x25mm
ERIKS Item #: W90A-64290010
Catalogue item no 1: 3144125 Catalogue item no 2: W80E-50449 Estimated delivery date 14-05-2024
|
Price (Per piece):
£1.88
|
||
WERA
Bit tough 1/4" DIN3126C6.3 recessed hexagon 3x25mm
ERIKS Item #: W90A-64290015
Catalogue item no 1: 3144126 Catalogue item no 2: W80E-50450 Estimated delivery date 14-05-2024
|
Price (Per piece):
£1.88
|
||
WERA
Bit tough 1/4" DIN3126C6.3 recessed hexagon 4x25mm
ERIKS Item #: W90A-64290020
Catalogue item no 1: 3144127 Catalogue item no 2: W80E-50451 Estimated delivery date 14-05-2024
|
Price (Per piece):
£1.88
|
||
WERA
Bit tough 1/4" DIN3126C6.3 recessed hexagon 5x25mm
ERIKS Item #: W90A-64290025
Catalogue item no 1: 3144128 Catalogue item no 2: W80E-50452 Estimated delivery date 14-05-2024
|
Price (Per piece):
£1.88
|
||
WERA
Bit tough 1/4" DIN3126C6.3 recessed hexagon 6x25mm
ERIKS Item #: W90A-64290030
Catalogue item no 1: 3144129 Catalogue item no 2: W80E-50453 Estimated delivery date 14-05-2024
|
Price (Per piece):
£1.88
|
||
WERA
Bit tough 1/4" DIN3126C6.3 recessed hexagon 8x25mm
ERIKS Item #: W90A-64290035
Catalogue item no 1: 3144140 Catalogue item no 2: W80E-50454 Estimated delivery date 14-05-2024
|
Price (Per piece):
£2.60
|