Deep Groove Ball Bearings (45 products containing 2479 Items)

Name: Single row deep groove ball bearing with snap ring groove and snap ring Steel Closure on both sides
Brand: NSK

Search within results

Industry

Brand

Execution

Single row

Single row deep groove ball bearings are constructed with one row of ball bearings. This bearing type is available in an open configuration, with seals or with shields.

Double row

Double row deep groove ball bearings are constructed with two rows of ball bearings. These bearings offer a higher load carrying capacity than a single row bearing. This bearing type is only available in an open configuration.

Material

Deep groove ball bearings are typically made of chrome steel, but are also available in stainless steel and polymer. Chromium steel bearings have a higher load carrying capacity than stainless steel bearings of similar size. Stainless steel deep groove ball bearings are resistant to corrosion caused by moisture or other media. Polymer ball bearings are typically used in applications where resistance to moisture or other chemicals is essential and steel cannot be used.

Sealing

With Sealing
Bearings that are "with sealing" include products with seal or shields. Shields and seals protect the bearing from contamination and because these products are lubricated during productions, greasing maintenance is not required. Shields are typically made of metal or plastic and do not touch the shield bore or the inner ring. Seals are made of elastomers and offer an option of no-contact, which is similar to a shield, or contact, which means the seal touches the inner ring. Contact seals provide the strongest protection against dirt and dust.

Without Sealing
Bearings that are "without sealing" have an open configuration that may require greasing maintenance. Double row bearings are always "without sealing."

Material sealing

Internal clearance

Baseline internal clearance is referred to as Normal, which indicates that the operational clearance will be suitable if the bearings are mounted as recommended and operating conditions are standard (or normal). If these conditions are met, the internal clearance is considered Normal. If, however, either the operating conditions or mounting conditions are non-standard (or abnormal), internal clearance must be adjusted accordingly. The radial internal clearance suffix designations for standard deep groove ball bearings are as follows:

C1 – Internal clearance smaller than C2
C2 - Internal clearance smaller than Normal
CN - Normal internal clearance
C3 – Internal clearance greater than Normal
C4 – Internal clearance greater than C3
C5 – Internal clearance greater than C4

Cage

Cage design, as well as its material, has a large impact on overall bearing performance. As the balls pass through the load zone, the cage is responsible for maintaining uniform ball spacing in the bearing. Operational characteristics such as maximum rotational speed, torque characteristics, temperature limits and lubricant flow are also influenced by the cage. The most common cage materials are stamped or machined brass and steel. Some cages may also be made of polymers, such as Polyamide 66.

Running accuracy

Lubrication

Groove type

Snap Ring Groove

A snap ring groove, when present on single row deep groove ball bearings, can allow the bearing to be located axially in the housing by a snap ring. This arrangement saves space and hastens mounting time. Two variants are available:

bearings with a snap ring groove only, designation suffix N
bearings with a snap ring groove and a snap ring, designation suffix NR

Non-Grooved

This value applies to any bearing that lacks an N or NR designation as the deep groove ball bearing is not grooved.

With flange

With Flange

These bearings have a flange on their outer rings. The flange assists in axial mounting and positioning.

Without Flange

These bearings do not have a flange on their outer rings. Snap rings serve a similar function to flanges, at a lesser cost.

How to decode bearing part numbers? Click on one of the codes below!

Grid

List

Sort by

Show quantity

5 / 5

NSK Single row deep groove ball bearing with snap ring groove and snap ring Steel Closure on both sides

8 items

NSK Single row deep groove ball bearing with snap ring groove and snap ring Steel Open

5 items

RHP Single row deep groove ball bearing Steel Closure on both sides

32 items

RHP Single row deep groove ball bearing Steel Open

37 items

RHP Single row deep groove ball bearing with snap ring groove and snap ring Steel Open MJ1.1/4NRJ

ERIKS item #: MJ1.1/4NR-NSK

Catalogue item no 1: 165197

Manufacturer partnumber: MJ1.1/4NRJ RRS 5

Estimated delivery date 03-04-2028

Price Price on Demand

Compare
Compare

{"itemTrackPD":{ "item_name": "single row deep groove ball bearing with snap ring groove and snap ring steel open mj1.1/4nrj", "item_id": "gr1172652508795733", "material_number": "MJ1.1/4NR-NSK", "price": "0", "item_brand": "rhp", "item_category":"bearings", "item_category2":"ball bearings", "item_category3":"deep groove ball bearings", "item_category4": "pr10175947957889987", "item_stockstatus": "available on date", "item_variant":"pce", "index": "5", "quantity": "" } }