ProductPage

SKF Sealed double row self-aligning ball bearing with cylindrical bore

Self-aligning ball bearings have two rows of balls and a common sphered raceway in the outer ring. The bearings are insensitive to angular misalignment of the shaft relative to the housing. They generate less friction than any other type of rolling bearing, which enables them to run cooler even at high speeds. Self-aligning ball bearing variants are:

Open
-with cylindrical bore
-with tapered bore, e g for use with adapter sleeves
-with extended inner ring

Sealed
-with cylindrical bore
-with tapered bore, e g for use with adapter sleeves

Bearings with seals
Some self-aligning ball bearings are also available with seals. Sealed bearings have a contact seal on both sides that is made of oil and wear-resistant NBR and reinforced with a sheet steel insert (designation suffix 2RS1). Sealed bearings are lubricated for the life of the bearing and should not be washed or relubricated. The bearings are considered virtually main ten ance-free.

Bearings with an extended inner ring
Self-aligning ball bearings with an extended inner ring are designed for less demanding applications that use commercial grade shafting. The special bore tolerance, class JS7, facilitates mounting and dismounting. Self-aligning ball bearings with an extended inner ring are located axially on the shaft by means of a slot at one end of the inner ring that engages a pin or shoulder screw fitted to the shaft. The holding device also prevents the shaft from spinning in the bearing bore. When two of these bearings are used to support a shaft, they should be positioned so that the inner ring slots either face each other, or are opposed to each other. If this is not the case, the shaft is located axially in one direction only.

Inner diameter (mm)
Outer diameter (mm)
Width (mm)
With sealing
Bore: Cylindrical
Internal clearance
Running accuracy: Standard
Clear filter      (59 of the 59 items displayed)
Page Size   
Next
Sealed double row self-aligning ball bearing with cylindrical bore 2200 E-2RS1TN9 SKF Sealed double row self-aligning ball bearing with cylindrical bore 2200 E-2RS1TN9 ERIKS Item #: 22002RS-SKF

Catalogue item no 1: 42356

Catalogue item no 2: W70A-40875

Sealed double row self-aligning ball bearing with cylindrical bore 2201 E-2RS1TN9 SKF Sealed double row self-aligning ball bearing with cylindrical bore 2201 E-2RS1TN9 ERIKS Item #: 22012RS-SKF

Catalogue item no 1: 42367

Catalogue item no 2: W70A-40878

Sealed double row self-aligning ball bearing with cylindrical bore 2201 E-2RS1TN9/W64 SKF Sealed double row self-aligning ball bearing with cylindrical bore 2201 E-2RS1TN9/W64 ERIKS Item #: 2201E2RSW64-SKF

Catalogue item no 1: 5221386

Sealed double row self-aligning ball bearing with cylindrical bore 2202 E-2RS1TN9/C3 SKF Sealed double row self-aligning ball bearing with cylindrical bore 2202 E-2RS1TN9/C3 ERIKS Item #: 22022RSC3-SKF

Catalogue item no 1: 2918631

Catalogue item no 2: W70A-61733

Sealed double row self-aligning ball bearing with cylindrical bore 2202 E-2RS1TN9/W64 SKF Sealed double row self-aligning ball bearing with cylindrical bore 2202 E-2RS1TN9/W64 ERIKS Item #: 22022RSW64-SKF

Catalogue item no 1: 4271673

Sealed double row self-aligning ball bearing with cylindrical bore 2202 E-2RS1TN9/GWB SKF Sealed double row self-aligning ball bearing with cylindrical bore 2202 E-2RS1TN9/GWB ERIKS Item #: 22022RSGWB-SKF

Catalogue item no 1: 4933816

Sealed double row self-aligning ball bearing with cylindrical bore 2202 E-2RS1TN9 SKF Sealed double row self-aligning ball bearing with cylindrical bore 2202 E-2RS1TN9 ERIKS Item #: 22022RS-SKF

Catalogue item no 1: 42380

Catalogue item no 2: W70A-40880

Sealed double row self-aligning ball bearing with cylindrical bore 2202 E-RS1TN9/VK313 SKF Sealed double row self-aligning ball bearing with cylindrical bore 2202 E-RS1TN9/VK313 ERIKS Item #: 2202RSVK313-SKF

Catalogue item no 1: 4933817

Sealed double row self-aligning ball bearing with cylindrical bore 2302 E-2RS1TN9 SKF Sealed double row self-aligning ball bearing with cylindrical bore 2302 E-2RS1TN9 ERIKS Item #: 23022RS-SKF

Catalogue item no 1: 44205

Catalogue item no 2: W70A-41497

Sealed double row self-aligning ball bearing with cylindrical bore 2203 E-2RS1TN9 SKF Sealed double row self-aligning ball bearing with cylindrical bore 2203 E-2RS1TN9 ERIKS Item #: 22032RS-SKF

Catalogue item no 1: 42386

Catalogue item no 2: W70A-40884

Inner diameter (mm)
Outer diameter (mm)
Width (mm)
With sealing
Bore: Cylindrical
Internal clearance
Running accuracy: Standard
Clear filter      (59 of the 59 items displayed)
Page Size   
Next